DJI Mimo App - DJI Osmo Mobile 6
Watch a live HD video feed on your mobile phone screen through the DI Mimo app. The app also allows you to use ShotGuides, Story mode, Hyperlapse, timelapse, ActiveTrack 5.0, DynamicZoom, and Pano, or configure the camera and gimbal settings in just a few taps.
Device: tap to connect to Osmo Mobile 6. Once connected, DJ! Mimo enters the camera view.
Academy: tap to watch tutorials and view manuals. Scan the QR code on the gimbal to access Academy directly.
Al Editor provides several templates to edit photos or videos.
Home: tap to return to the home screen. Album: manage and view footage from the phone or DJI devices.
Editor: tap to edit photos or videos from Osmo Mobile 6 or import and edit from a mobile device.
Profile: register or log in to a DJI account. Tap the setting icon to access more settings.
Connecting to the DJI Mimo App
- Power on Osmo Mobile 6.
- Enable Bluetooth on the mobile phone and connect to the device with an 0M6 prefix name in DJI Mimo.
- Users are required to allow access to certain information when using DJI Mimo for the first time. The exact information will be listed in the prompt. An internet connection is required. Osmo Mobile 6 will be activated after authorization and the app will enter the camera view.
When connected via Bluetooth, Osmo Mobile 6 is able to control the mobile phone camera without DJ! Mimo. Refer to the Mobile PhoneCompatibility List for details at www.dji.com/osmo-mobile-6
Camera View
- Home: Tap to return to the home screen.
- ShotGuides:
ShotGuides provides step-by-step shooting tutorials according to the scenario, users can edit the video using Al Editor. - ActiveTrack Select Box ° :
ActiveTrack 5.0 has been optimized for tracking subjects. The subject will remain in the center of the camera view by default. The camera view can be adjusted manually. There are three ways to use ActiveTrack 5.0:
a. Drag a box on the screen in the camera view in DJ, Mimo. A green box around the subject indicates ActiveTrack 5.0 is successfully enabled. Tap the
icon on the top corner to stop tracking.
b. Enable Gesture Control
and select “Follow and Shoot” in DJ! Mimo, and perform a palm or V gesture for one to two seconds when facing the camera. The gimbal will follow the subject closest to the camera. The detection range between the rear camera and the gesture is 0.5 to 4 m. Note that ActiveTrack 5.0 may consume more power and cause the temperature of the mobile phone to increase. Perform a palm or V gesture to stop recording.
c. Press the trigger once to start or stop ActiveTrack 5.0. The gimbal will follow the subject in the center of the screen by default. When using ActiveTrack 5.0 move the joystick to adjust the camera view. - Gimbal Battery Level
: Displays the current battery level of the gimbal. - Mobile Phone Battery Level
: Displays the current battery level of the mobile phone. - Flash
: Displays the flash status. - Gimbal Mode
: Displays the current gimbal mode: Follow, Tilt Locked, FPV, or SpinShot. - Focus/Zoom Mode
MF: Indicates the feature of the side wheel when using focus (MF) or zoom (ZM). - Front/Rear camera Switch
: Tap to switch between the front and rear cameras of your mobile phone. Selfie, Follow, and glamour effects are automatically enabled when switching to the front camera.
Note: glamour effects are not supported when recording at 4K or 60fps. - Shooting Modes
Scroll to select the shooting mode.
Hyperlapse: this enables you to shoot a Timelapse photo while moving the mobile phone. Tap the shutter button to begin.
Timelapse: there are four types of timelapse (Fixed Angle, L to R, R to L, and Custom Motion). After selecting the timelapse, tap the settings at the top of the screen. For
Fixed Angle, L to R, and R to L set the interval and duration, and start to shoot. For Custom Motion, select up to four positions and the gimbal will move to each position in the sequence.
DynamicZoom: choose from Move Out and Move In mode. After selecting a mode, drag a box to select a subject, and tap the shutter button to start shooting. Slow Motion: tap to shoot video at 4x and 8x slow motion. Check the mobile phone compatibility list for more information.
Video: tap to shoot a normal video.
Photos: tap to take a single shot photo. Press and hold for burst shooting.
Pano: tap to take a 3×3, 240°, or CloneMe panorama photo. The camera will take nine, seven, or three photos separately and generate a pano.
Story: provides several templates for recording video. - Shutter/Record Button
: Tap to take a photo or to start or stop recording a video. - Gesture Control Switch: Tap to access Gesture Control settings.
- Playback: Tap to preview photos and videos.
- Focus Distance
: Click the side wheel to switch to focus mode and display the current focus distance. - Zoom
: Displays the current zoom ratio. Place two fingers on the screen and spread to zoom in, pinch to zoom out, or slide the bar to control zoom. - Shooting Parameters
: Displays the shutter speed, ISO, and EV values (Compatible with most mobile phones). - Settings • • •
: Camera Settings
The settings vary depending on the shooting mode. Note that the flash, white balance, and grid settings are only available when using the rear camera. For iOS devices, Selfie Flip is available when using the front camera in photo and video mode. For Android devices, Selfie Flip is only available in photo mode.
: Gimbal Settings
Gimbal Mode: choose from Follow, Tilt Locked, FPV, and Spinshot. Follow Speed: provides Fast, Medium, and Slow follow speed. Gimbal Auto Calibration: reduces drift caused by nearby magnetic interference or human error. Before calibrating, place Osmo Mobile 6 on a flat surface using a tripod. Do not touch the gimbal during calibration. Horizontal
Gimbal Adjustment: make sure the magnetic phone clamp is level before adjusting the gimbal.
Dial Mode: assign focus, zoom, or disable features for the side wheel.
Press Switch Button 3 Times: features can be set to take photos, record, or enter Quick Settings. Joystick Speed: tap to set the maximum speed when controlling the joystick. There are Fast, Medium, and Slow options.
Joystick Control Direction: choose from Free and Horiz/Vert. Free enables the gimbal to be controlled in horizontal and vertical directions simultaneously. HorizNert enables the gimbal to be controlled in a horizontal or vertical direction. Invert Joystick: after enabling this feature, the gimbal movement direction is inverted. Select from Off, Horizontal, Vertical, and All. After enabling Horizontal, the pan-axis movement direction is inverted. After enabling Vertical, the tilt-axis movement direction is inverted.
Invert Dial: after enabling this feature, the dial is inverted from the previous settings. Select from Disable, Focus Direction, Zoom Direction, and All options.
Sound: the sound of the gimbal can be turned on/off.
General Settings
Includes information such as Device Management, Device Name, Version Information, and Device Serial Number. - Shooting Parameters Settings Shooting Parameters can be set according to the shooting mode. Tap the icon to access settings.
Gesture Control and ActiveTrack 5.0 are not available in the following scenarios:
a. Gimbal mode is set to FPV or SpinShot. b. The zoom ratio exceeds 3x.- Selfie and Follow are not available in the following scenarios:
a. Gimbal mode is set to FPV or SpinShot.
b. Gesture Control is enabled.
c. The zoom ratio of the front camera exceeds 3x. - Shooting parameter settings vary depending on the model of the mobile phone.
Read more: https://manuals.plus/dji/osmo-mobile-6-gimbal-manual#ixzz7pyUe59Af